Before you chase Zone 2, find out what your watch means by it. A colored band is a setting with a calculation behind it. Two devices can assign different zone numbers to the same heartbeat without either sensor recording a different pulse.
Our previous guide treated 60 to 70% of maximum heart rate as a universal definition and made stronger claims about training duration and benefits than its citations supported. This November 18, 2026 replacement corrects that. We checked current manufacturer documentation and built worked examples that separate the formula, the inputs and the displayed zone.
The central argument is practical: you cannot compare time in Zone 2 until you have compared the zone boundaries. That check is more useful than changing your pace to satisfy a color you have not investigated.
Three systems, with their limits attached
| Documented system | What the source establishes | What to check on your device |
|---|---|---|
| Polar 360 manual | Its five-zone table puts Zone 2 at 60 to 70% of maximum heart rate. | Maximum-HR input and any personalized boundaries. |
| Garmin Descent Mk3, manual v7, April 2026 | Options include BPM, % maximum HR, % heart-rate reserve and % lactate-threshold HR. Sport-specific zones are supported. | The “Based On” option, its reference value, and the selected sport profile. |
| Apple Watch, watchOS 27 guide | Automatic personalized zones use health data; zones 2, 3 and 4 can be edited manually. The guide describes zones as percentages of maximum HR without giving the full calculation. | Automatic versus Manual and the actual lower/upper BPM limits. |
We have not inferred Apple's complete formula from memory or assigned one Garmin model's options to every Garmin. The point of this table is to identify the setting that can settle a disagreement, including where documentation leaves something unknown.
The same percentage can produce a different pulse range
Use a hypothetical maximum heart rate of 190 beats per minute and resting heart rate of 60. These are invented inputs for arithmetic, not measurements or targets for the reader.
A band at 60 to 70% of maximum heart rate is 0.60 × 190 through 0.70 × 190: 114 to 133 bpm.
Heart-rate reserve is maximum minus resting heart rate, here 130 bpm. A band at the same 60 to 70% of reserve, added back to resting heart rate, is 60 + 0.60 × 130 through 60 + 0.70 × 130: 138 to 151 bpm.
| Calculation | Lower boundary | Upper boundary |
|---|---|---|
| 60-70% maximum HR, max 190 | 114 bpm | 133 bpm |
| 60-70% reserve plus rest, max 190/rest 60 | 138 bpm | 151 bpm |
| 60-70% maximum HR, max changed to 180 | 108 bpm | 126 bpm |
This is not a claim that all brands call 60 to 70% of reserve “Zone 2.” We hold the percentage endpoints fixed to expose the effect of the formula. A real system may change both the method and its percentage boundaries. A lactate-threshold method uses another reference again, so copying the same percentages across methods is not a valid conversion.
At 130 bpm in the first example, the pulse is 68.42% of maximum HR but 53.85% of reserve: (130 - 60) ÷ (190 - 60) × 100. One pulse, two percentages. The sensor need not have changed at all.
Download the method reference or JSON with all inputs and calculations.
A changed input can redraw the past comparison
Changing the hypothetical maximum from 190 to 180 moves the 60 to 70% maximum-HR band from 114-133 to 108-126 bpm. A pulse of 130 falls inside the first band and above the second. No change in fitness is required to produce that classification difference.
Garmin's cited manual describes automatic detection options for maximum and lactate-threshold heart rate, as well as manual settings and separate sport profiles. That gives an owner several concrete places to check. It does not establish whether a particular software version retrospectively recalculates every old workout. We did not test that behavior.
For a comparison over time, save the boundaries used for each activity when possible. A screenshot of today's settings cannot prove which settings classified a workout from six months ago.
Before deciding that your training is wrong
- Compare the actual heart-rate traces. If the BPM values disagree, that is a measurement question. If they agree but zone minutes differ, inspect classification first.
- Record the method and reference inputs. Include maximum HR, resting HR or threshold HR where relevant, and whether the value was entered or estimated.
- Copy the displayed BPM boundaries. They are the most direct description of what the device counted.
- Check sport, date and version. A running profile and cycling profile may not use the same configuration. Save what is known and label what is missing.
A watch zone alone does not establish a laboratory physiological threshold. This reference does not prescribe exercise intensity, determine a person's maximum HR or validate an age-based estimate. If you need an individualized training target, a calculation example cannot provide that assessment.
A better question for the chart
“Why did I leave Zone 2?” can mean “my pulse rose,” “my boundary changed,” or “I selected a different profile.” Those explanations lead to different next steps. Treating the label as a fixed biological fact hides that distinction.
Our original contribution is the configuration comparison and controlled arithmetic examples. No participant data or device trial is involved. Manufacturer options may change; follow the manual for your exact model. The original calculations can be reused with attribution and these limits.
For another chart that can change without a new workout, see our investigation of moving training-load windows. Vora, the publisher, brings workouts, nutrition and wearable context together with proactive AI. That context is useful only when the underlying numbers retain their meaning.